How To: Clean Martin Jem Compact Hazer Pro

This article will show and explain how to use clean the Martin Jem Compact Hazer Pro.

Part 1 - Hazer accessories

Part 2 - Cleaning the hazer (Indoors)

Part 3 - Cleaning the hazer (Outdoors)

Before you start:

If you have not properly been trained to clean the hazer or have not been given permission, please do not proceed.
If you don't feel comfortable doing either. Submit a tech ticket and the tech team can help with this process. (Note* If you do it indoors, we recommend contacting facilities to turn on the air)
Please do this process every 4 months to extend the lifespan of the hazer as long as possible. Here is a link to a spreadsheet to keep track of every campus's cleaning progress. If the hazer hasn’t been cleaned in a while, the tech team will be reaching out to that campus to make sure the cleaning gets done for that quarter.

Part 1 - Hazer Accessories

Use the following links to purchase all the necessary components for this process.

HAZE FLUID

HAZE PRO-CLEAN AND STORAGE (BOX OF 4)

ALL-PURPOSE CLEANER

MICROFIBER CLOTHES

Part 2 - How to clean hazer (Indoors)

Step 1

After you have your essentials, disconnect the PowerCon and begin wiping down the outer surface of the hazer and in the outtake with the all-purpose cleaner and a paper towel. Spray the cleaner on the towel first, please never spray onto the unit.

Before After

Step 2

Use the microfiber cloths to get into the grills and around any corners.

Before After

Step 3

Once you have done that, disconnect the haze fluid bottle from the cap while making sure the white filter at the end doesn’t touch anything. Place the tube and cap into the Pro-clean and storage jug, then power on the hazer.

Step 4

Go to the console and set the hazer to full. Once the haze starts coming out of the unit, set a timer for 45 minutes.

Step 5

After 45 minutes, turn the hazer off by hitting the shutdown switch on the side. The LCD on the unit will show a timer. Wait until the LCD says STBY. Then turn off the mains switch. (It’s important to hit the shutdown switch before powering down so the hazer can depressurize from the cleaning)

Step 6

Replace the Pro-clean and storage jug with the normal haze fluid jug. Turn it back on and let it run for another 15 minutes.

Step 7

Once complete, the hazer is properly cleaned and ready for the weekend.

Part 3 - How to clean hazer (Outdoors)

Step 1

Before After

Step 2

Use the microfiber cloths to get into the grills and around any corners.

Before After

Step 3

Step 4

Put the hazer on the ground with paper towels underneath so it doesn’t stain the concrete and turn the unit on.

Step 5

Set the Run mode. The Run mode sets the operational mode of the unit, either Off, Standby (heaters remain on), Fan only, Timer mode or Continuous mode. Use the Menu Previous / Next buttons to find the RUN mode, once there, use the Next button to cycle OFF, STBY, FAN, TIME, CONT options. select the CONT option then press enter.

Step 6

After you have set the unit to CONT, then Set Haze density. Use the Menu Previous / Next buttons to select the HAZE option. Use the Up/Down buttons to select the density from 0%-100%. Set this to 100% and press enter button to store the haze setting.

Step 7

Once the haze starts coming out of the unit, set a timer for 45 minutes.

Step 8

Step 9

Replace the Pro-clean and storage jug with the normal haze fluid jug. Turn it back on and let it run for another 15 minutes.

Step 10

Once complete, the hazer is properly cleaned and ready for the weekend.

If you need assistance or are missing components, Submit a Ticket and a member of the Tech Team will be happy to help!